Leak and Flow Testing

DUAL ABSOLUTE.
THE ABSOLUTE REVOLUTION.

ALONGSIDE CUSTOMERS IN EVERY SECTOR.

T6990

Absolute decay entry-level leak tester

Always easier:

T6990 has an enhanced user interface, thanks to an innovative tempered glass panel with built-in capacitive keyboard, around a 3.5” colour display.
The new, high-resolution display makes it even easier to view the test cycle and the programming menus, and the capacitive keyboard allows fast parameter entry.

All the connections you need:

T6990 has a more limited port supply than high level range, but is equally complete: a USB slave port, RS232, RS485 and CAN Bus.
The front panel has a master USB port for connection to a USB key to save the tests conducted, backup/restore parameters and upgraded tool firmware.
The connection to thermal printers, barcode/data-matrix readers and markers takes place automatically using an internal menu.

So small, yet so powerful:

T6990 can count on a measurement resolution of 0.1 Pa to 1 bar (0.5 Pa to 6 bar) stable and noise-free, sharing a part of the measurement section implemented on the higher series T8000 and T9000.
Despite being designed as an entry-level tool, the measurement performance is comparable to those of the rest of the ForTest range.

Ultra compact pneumatics:

T6990, to keep dimensions as compact as possible, assembles a pneumatic unit with standard valves, ideal to test volumes up to 5 litres. The robustness of these valves means no scheduled maintenance of any kind is necessary, therefore guaranteeing

Everything is where it should be:

Despite the compact dimensions which made use of more simplified menus necessary, the T6990 user interface was however designed to facilitate programming of the test parameters.
The front panel is made of a single sheet of tempered glass and aluminium, which makes it extremely easy to clean, making the T6990 suitable for use in the laboratory and on the production line.
The extensive internal menus are easy to understand, and the graphic interface was designed to only display important information.
Everything is exactly where it should be.

T8890

Two channel absolute decay universal leak tester

Two channel leak tester:

T8890 is the new two channel equipment by ForTest enclosed in the same casing as the single channel T8990, making it the most compact in its category.
It is available with 3 types of pressure adjustment: single manual regulator, double manual regulator and single automatic electronic regulator.
Ideal to test pairs of lights or parts with double compartments. It can half test times, however maintaining the flexibility and reliability of the T8990.
Parameter programming is much faster thanks to the new numerical keyboard integrated in the menus, and the big display makes viewing even clearer of the test cycle.
The main screen also enables interaction with shortcut functions, such as test program change, “smart” test archive menu and locking/unlocking using a password.

Limitless connectivity:

The new T8890 equipment includes ports for the USB slave, RS232, RS485, CAN Bus and TTY.
The front panel has a master USB port for connection to a USB key to save the tests conducted, backup/restore parameters and upgrade firmware.
The connection to thermal printers, barcode/data-matrix readers and markers takes place automatically using an internal menu.

Always better measurements:

The test cycle was further accelerated thanks to processor and coprocessor interaction, maintaining the reliability that has always made ForTest unique.
We can say with certainty that T8890 avails of the most advanced measurement section in the world, thanks to the centring technology in windows and the double Faraday optical-isolated cage, which reduces the settling times under 18 ms.
This gives a real measurement resolution of 0.1 Pa at 1 bar (0.5 Pa at 6 bar), stable and noise-free.

Optimised pneumatic section:

Assembly of the latest generation solenoid valves has enabled a 30% increase in the filling speed compared to the previous model, maintaining reliability unaltered over time. This equipment does not require expensive maintenance in the pneumatic department which make them increasingly reliable and long-lasting.

Innovative design:

What appears to be a simple design exercise, in fact hides an in-depth study to make use and understanding of the equipment as simple as possible.
The front panel is made of a single sheet of tempered glass and aluminium, which makes it extremely easy to clean, making the T8890 suitable for use in the laboratory and on the production line.
The extensive internal menus are easy to understand, and the graphic interface was designed to only display important information.
Everything is exactly where it should be.

T6060

Differential entry-level leak tester

So small, yet so powerful:

T6060 can count on a measurement resolution of 0.1 Pa to 1 bar (0.5 Pa to 6 bar) stable and noise-free, sharing a part of the measurement section implemented on the higher series T8000 and T9000.
Despite being designed as an entry-level equipment, the measurement performance is comparable to those of the rest of the ForTest range.

All the connections you need:

T6060 has a more limited port supply than high-level range, but is equally complete: a USB slave port, RS232, RS485.
The front panel has a master USB port for connection to a USB key to save the tests conducted, backup/restore parameters and upgrade firmware.
The connection to thermal printers, barcode/data-matrix readers and markers takes place automatically using an internal menu.

Everything is where it should be:

Despite the compact dimensions which made use of more simplified menus necessary, the T6060 user interface was however designed to facilitate programming of the test parameters.
The front panel is made of a single sheet of tempered glass and aluminium, which makes it extremely easy to clean, making the T6060 suitable for use in the laboratory and on the production line.
The extensive internal menus are easy to understand, and the graphic interface was designed to only display important information.
Everything is exactly where it should be.

T8090

Dual absolute technology

The Dual Absolute:

The new Dual Absolute technology makes it possible to eliminate the disadvantages of a classic differential system, improve its advantages and renew an industry that has been standing still for decades. Thanks to the new Dual Absolute technology, ForTest has combined the simplicity of a classic absolute decay system with the precision and sensitivity of a differential system, bringing leak testing instruments to a level never seen before.
The new algorithms and measurement hardware eliminate typical defects in a differential system, such as differences in stabilization between the test part and the reference sample.
The new range of instruments can work in 3 different ways: Pure Differential, Dual Absolute and Central Zero.
The new Dual Absolute technology is so powerful and reliable that ForTest has decided to stop developing the classic differential system.

A touch of innovation:

The video controller “ForTest MMI” brought a superior level of human-machine interaction, thanks to an innovative capacitive panel in tempered glass, around a splendid 6.2” colour display.
Parameter programming is much faster thanks to the new numerical keyboard integrated in the menus, and the big display makes viewing even clearer of the test cycle.
The main screen also enables interaction with shortcut functions, such as test program change, “smart” test archive menu and locking/unlocking using a password.

Limitless connectivity:

The new T8090 equipment includes ports for the USB slave, RS232, RS485, Profinet, EtherNet IP and EtherCAT. Assembly may also include an optional Ethernet port and a 26-pole connector with 4 inputs and 8 outputs, which are completely programmable, for interfacing with the external valves, safety barriers, switches, etc…
The front panel has a master USB port for connection to a USB key to save the tests conducted, backup/restore parameters and upgrade tool firmware.
The connection to thermal printers, barcode/data-matrix readers and markers takes place automatically using an internal menu.

Always better measurements:

The test cycle was further accelerated thanks to processor and coprocessor interaction, maintaining the reliability that has always made ForTest unique.
We can say with certainty that T8090 avails of the most advanced measurement section in the world, thanks to the centring technology in windows and the double Faraday optical-isolated cage, which reduces the settling times under 18 ms.
This gives a real measurement resolution of 0.1 Pa at 1 bar (0.5 Pa at 6 bar), stable and noise-free.

Optimised pneumatic section:

Assembly of the latest generation solenoid valves has enabled a 30% increase in the filling speed compared to the previous model, maintaining reliability unaltered over time. Our tools do not require expensive maintenance in the pneumatic department which makes them increasingly reliable and long-lasting.

Innovative design:

What appears to be a simple design exercise, in fact hides an in-depth study to make use and understanding of the tool as simple as possible.
The front panel is made of a single sheet of tempered glass and aluminium, which makes it extremely easy to clean, making the T8090 suitable for use in the laboratory and on the production line.
The extensive internal menus are easy to understand, and the graphic interface was designed to only display important information.
Everything is exactly where it should be.

T8730

Continous measurement universal flow tester

Flow measurement with solid-state sensor:

T8730 was designed for the precise task of measuring flows on parts such as filters (medicinal, diesel or petrol), tubes, nozzles, openings and valves.
Other than the classic flow measurement, the instrument also has other ways of making it as versatile as possible in its category: ascent and descent ramps, opening tests and burst testing.
Another separate function is the “continuous measurement“, i.e., a test with infinite times allowing adjustment of the taps and part repairs in real time.
The tool also avails of an intelligent pressure adjustment, which uses the automatic pressure regulator to continuously adjust the test pressure based on the variation in load loss, to ensure the reading is as stable and repetitive as possible.

Limitless connectivity:

The new T8730 equipment includes ports for the USB slave, RS232, RS485, CAN Bus and TTY. Assembly may also include an optional Ethernet port and a 26-pole connector with 4 inputs and 8 outputs, which are completely programmable, for interfacing with the external valves, safety barriers, switches, etc…
The front panel has a master USB port for connection to a USB key to save the tests conducted, backup/restore parameters and upgrade tool firmware.
The connection to thermal printers, barcode/data-matrix readers and markers takes place automatically using an internal menu.

Top category technology:

We decided not to make compromises when equipping the T8730, assembling the best components currently on the market, such as the piezoelectric electronic regulator which guarantees stable and repetitive adjustment, or the solid-state sensor with a vast reading range, or the specific valves for this model, with a life estimated in tens of millions of cycles.
All these advantages give never seen precision performance, stability and accuracy.
Measurement resolution starts with 0.1 cc/min based at the bottom of the scale, varying from 1,000 to 20,000 cc/min, with maximum pressure of 2 bar.

Made to measure pneumatic section:

To avoid overheating due to long activation times of the filling circuit, we have designed, high-capacity pneumatic valves, which not only work in hot temperatures, but also quickly fill the piece being tested, making the T8730 also suitable for testing on parts with significant volumes.
All the above, while maintaining ForTest’s historic reliability.

Innovative design:

What appears to be a simple design exercise, in fact hides an in-depth study to make use and understanding of the equipment as simple as possible.
The front panel is made of a single sheet of tempered glass and aluminium, which makes it extremely easy to clean, making the T8730 suitable for use in the laboratory and on the production line.
The extensive internal menus are easy to understand, and the graphic interface was designed to only display important information.
Everything is exactly where it should be.

T8997

Leak test and flow test equipment “all in one”

A touch of innovation:

The new T8997 leak tester was designed with the idea of combining two different types of measurement in a single instrument, making it suitable for leak tests and flow tests.
The new video controller “ForTest MMI” brought a superior level of human-machine interaction, thanks to an innovative capacitive panel in tempered glass, around a splendid 6.2” colour display.
Parameter programming is much faster thanks to the new numerical keyboard integrated in the menus, and the big display makes viewing even clearer of the test cycle.
The main screen also enables interaction with shortcut functions, such as test program change, “smart” test archive menu and locking/unlocking using a password.

Limitless connectivity:

The new T8997 equipment includes ports for the USB slave, RS232, RS485, CAN Bus, TTY, Profinet and EtherCAT. Assembly may also include an optional Ethernet port and a 26-pole connector with 4 inputs and 8 outputs, which are completely programmable, for interfacing with the external valves, safety barriers, switches, etc…
The front panel has a master USB port assembled on it for connection to a USB key to save the tests conducted, backup/restore parameters and upgrade tool firmware.
The connection to thermal printers, barcode/data-matrix readers and markers takes place automatically using an internal menu.

Always better measurements:

T8997 contains two different technologies, the measure with absolute pressure drop and mass. The first one is suitable for the detection of micro losses, while the second one is created for the flow test.
This instrument is suitable for tests in the GAS sector (gas ramps, injectors) and medical (bags, lters, etc …).
The two measurements work individually and not simultaneously, and it is possible to program automatic sequences directly from the instrument panel.
The test cycle was further accelerated thanks to processor and coprocessor interaction, maintaining the reliability that has always made ForTest unique.
We can say with certainty that T8997 avails of the most advanced measurement section in the world, thanks to the centring technology in windows and the double Faraday optical-isolated cage, which reduces the settling times under 18 ms.
This gives a real measurement resolution of 0.1 Pa at 1 bar (0.5 Pa at 6 bar), stable and noise-free.

Optimised pneumatic section:

Assembly of the latest generation solenoid valves has enabled a 30% increase in the filling speed compared to the previous model, maintaining reliability unaltered over time. Our tools do not require expensive maintenance in the pneumatic department which makes them increasingly reliable and long-lasting.

Innovative design:

What appears to be a simple design exercise, in fact hides an in-depth study to make use and understanding of the tool as simple as possible.
The front panel is made of a single sheet of tempered glass and aluminium, which makes it extremely easy to clean, making the T8997 suitable for use in the laboratory and on the production line.
The extensive internal menus are easy to understand, and the graphic interface was designed to only display important information.
Everything is exactly where it should be.

We are happy to answer all your questions about ForTest´s Leak and Flow Test Equipment.

Just give us a call or use the contact button on the right.

Ms. Witchayarai Petbundi (Nong)
TEL.: +66 (0) 85 323 7260
E-MAIL: info@exyneasia.com